AMS server exits for no reason

Home Forums Forum AMS server exits for no reason

This topic contains 1 reply, has 2 voices, and was last updated by  vip 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1470

    S Harris
    Participant

    Hi !

    The AMS_Server appears to start up, then exits after around four minutes.

    Any suggestions why this is happening?

    thanks in  advance

    Steve

    #1991

    vip
    Participant

    Hi Steve,

    The AMS_Server’s config file, ams.config, tells it which Prosody S to use – the ‘module’ attribute. If this attribute is not set, as is the default, the AMS_Server will use the first configured Prosody S. If the Prosody S the AMS_Server tries to use is not contactable, the AMS_Server will wait for around 4 minutes and then exit.

    Either way, investigation of the AMS_Server log files will reveal the cause.

     

    I hope this helps,

     

    M

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.