| Digital network access support |
| |
Prosody X cPCI E1/T1 base board options |
|
8 trunks |
16 trunks |
| Network line interface module options |
8 E1/T1 trunks via PMXC module |
16 E1/T1 trunks via PMXC module |
| Max audio/voice channels per board |
248 |
496 |
| Network terminations |
75R, 100R or 120R – software selectable |
| E1/T1 software selectable? |
Yes |
| Rear connectors |
Passive rear transition module
(8 RJ45/RJ48C) |
Passive rear transition module
(16 RJ12) |
| Adapter cables (supplied) |
Not applicable |
16 RJ12 to RJ45/RJ48C |
| Protocols supported and telecom approval |
|
| SS7 protocol stacks |
MTP, ISUP, SCCP, TCAP |
| SS7 signalling links |
Up to 128 user-defined 64kbits/s timeslots |
| SS7 bearer channels per local pointcode |
Unrestricted |
| Signal processing |
| Resources |
Tone generation and detection |
Included with PMXC – for DTMF and CAS tone signalling |
A/µ, µ/A law conversion |
Included with PMXC
|
| Physical and environmental |
| board format |
6U size, single slot cPCI board |
| Bus type |
PICMG 2.0 cPCI (3V3/5V) |
| CT board interconnections |
H.110 CT bus; loading factor 1 |
| board control |
Host-based via PCI bus or remote via Ethernet |
| Remote board management |
SNMP V1; SNMP V2c; Aculab ACT and remote control toolset |
| Ethernet interfaces |
Dual 1GbE RJ45 on rear panel or cPSB PICMG 2.16 on the backplane |
| Power consumption (maximum) |
45W (5A at 5V, 6A at 3V3) |
| RoHS compliance |
Fully compliant, expressed as ‘6 of 6’ |
| EMC standard |
Meets all mandatory international standards |
| Safety standard |
Meets all international certification schemes e.g., CB/UL/CUL |
| |
|
| Power consumption (maximum in Watts) |
23W |
45W |
| Operating environment |
Operating temperature: 0 to +50 °C; storage temperature: -20 to +70°C; humidity: 10 to 95% RH non-condensing; altitude: 0 to 2500m |
| Operating systems supported |
|
