Digital network access support |
| Network line interface module options |
1, 2 or 4 E1/T1 trunks on board,
CAS/SS7 supported via DSP module |
| Speech channels per board (maximum) |
124 |
| Network connectors |
RJ45/RJ48C |
| Network terminations |
75R, 100R or 120R – software selectable |
| E1/T1 – software selectable? |
Yes |
| Telecom approvals |
We have a wide range of protocols and approvals – see www.aculab.com/products/protocols_and_approvals.htm |
| Protocol highlights |
Aculab’s range of protocols, available under a cost free licence include; |
- AT&T
- DPNSS
- MFC R2 CAS
- Q.SIG
|
- ETS300
- INS1500
- NI2
- T1 Robbed bit
|
| SS7 protocol stacks |
Integrated MTP; ISUP; SCCP; TCAP;
redundant MTP3; distributed ISUP;
flexible ISUP |
| SS7 signalling links |
Up to 124 user-defined 64kbits/s timeslots per board; up to 124 links/linksets per local pointcode
|
| SS7 bearer channels per local pointcode |
Unrestricted |
| Signal processing |
A/µ, µ/A law conversion |
With or without gain control |
Optional DSP
resource |
2-party conferencing |
2-party conversation monitoring (with added warn tone) |
| Tone generation
and detection |
DTMF detection, call progress detection, and combined DTMF and call progress generation (international tone plans) |
| Fax tone detection |
Group 3 carrier frequency detection at 1100Hz and 1300Hz |
| Physical and environmental |
| board format |
Full size board; single slot PCIe |
| Bus type |
PCISIG 1.1; electrical/mechanical x4 |
| CT board interconnections |
H.100 CT bus; loading factor 1 |
| Power consumption (maximum) |
25W |
| Operating environment |
Operating temperature: 0 to +50°C;
storage temperature: -20 to +70°C;
humidity: 10 to 95% RH non-condensing;
altitude: 0 to 2500m |
| EMC standards |
Meets all mandatory international standards |
| Safety standards |
Meets all international certification schemes
e.g., CB; UL; CUL |
| Operating systems supported |
|
| RoHS compliance |
Compliant, expressed as ‘5 of 6’ |
